JBL POWER Series P6560C 6.5 2 way COMPONENTS 270 Watts

JBL POWER SERIES 6.5INCH COMPONENT SPEAKER P6560C

Component Systems
Power Series
P6560C
 
 
165mm (6-1/2") 2-Way component system with Plus One Woofer and high-bandwidth edge-driven textile-dome Tweeter. This system features the I-Mount Tweeter-mounting system and a computer-optimized outboard passive Crossover network with Tweeter-level control.

New HCL cone material – This breakthrough material consists of two woven-glass-fiber layers with an epoxy-coated Nomex honeycomb core. Exceptionally stiff, yet lightweight, it offers increased efficiency, exceptional midrange clarity and lower distortion at high output levels.

 
The P6560c's tweeter features our proprietary I-Mount tweeter-mounting system, which allows for precise imaging and easy installation.

 
High-bandwidth edge-driven textile dome tweeters – These are not commonly used miniature cone tweeters, but full edge-driven domes like those found in high-end home audio loudspeakers. The benefits of this full edge-driven topology are reduced distortion at high output levels and superior integration with the mid/woofer.

 
Plus One woofer cones – The P6560c's mid/woofer uses a cone with more surface area than that found in competing models of the same size. The benefit is increased bass output and increased efficiency.

 
Computer-optimized voice-matched passive crossover – The P6560c comes equipped with an outboard crossover that has been voice-matched to ensure optimium imaging, clarity and detail. The crossover also features a tweeter-level control, allowing for precise tuning based on the tweeter location.

 
Oversized voice coils and spider integrated tinsel leads – The P6560c mid/woofer features a voice coil larger that that found on competing models of the same size. This larger voice coil increases power handling while minimizing distortion. The spider integrated tinsel leads greatly enhance reliability and eliminate audible tinsel-lead slap.

 
True Four Ohms – All Power Series speakers feature two-ohm voice coils. Original factory-installed speaker wiring in many cars is 18–22 gauge. This wire, and heating in the voice coil when power is applied, increases the impedance “seen” by the amplifier or head unit. The impedance of Power Series models has been adjusted to compensate for this increase, and can safely be driven by any head unit.

 
 
SPECIFICATIONS
General
Power Handling, RMS 90 Watts
Power Handling, Peak 270 Watts
Sensitivity 94dB
Frequency Response (±3dB) 45Hz – 23kHz
Mounting Depth Mid/woofer: 63mm (2-1/2"); tweeter: 28mm (1-3/16")
Diameter 165mm
Impedance 2 Ohms